Skip to main content
News

China Solicits Comments on Three New Food Contact Materials

Chinese flag

On April 22, 2022, China’s National Center for Food Safety Risk Assessment (CFSA) requested comments on expanded use for one food-contact material and two new resins. The substances and specifications are listed below.

Food-Contact Materials with Expanded Usage

  1. 2-(5-Chloro-2H-benzotriazol-2-yl)-6-(1,1-dimethylethyl)-4-methylphenol (CAS No. 3896-11-5) for use in polystyrene (PS) at a maximum use level of 0.5% and specific migration level (SML) of 30 mg/kg (as sum of 2-(2H-benzotriazol-2-yl)-4-methylphenol, 2-(5-Chloro-2H-benzotriazol-2-yl)-4,6-bis(1,1-dimethylethyl) phenol and 2-(5-Chloro-2H-benzotriazol-2-yl)-6-(1,1-dimethylethyl)-4-methylphenol). Except for styrene homopolymer, PS plastic materials and articles containing this substance may not be used in contact with foods with an ethanol content higher than 50% of fatty foods. These restrictions must be labeled in accordance with the provisions of GB 4806.1.

New Resins

  1. Hexane, 1, 6-diisocyanato-, polymer with poly (oxy-1,2-ethanediyl), α-methyl-ω-hydroxy- (CAS No. 143472-08-6 and 160994-68-3) for use in adhesives with indirect food contact at the dosage as necessary and with an SML of non-detectable (ND), where the detection limit is 0.01 mg/kg as isocyanate moiety, and a maximum permitted residual content (QM) of 1 mg/kg as isocyanate moiety.
  2. 1,4-benzenedicarboxylic acid, polymer with 1,3-benzenedicarboxylic acid, 2,2,4,4-tetramethyl-1,3-cyclobutanediol, 1,4-cyclohexanedimethanol, 1,3-propanediol, 2-methyl-, and adipic acid for use in coatings and coating layers at a maximum use level of 80% (on dry film weight basis) and SMLs of 7.5 mg/kg (as 1,4-benzenedicarboxylic acid), 5 mg/kg (as 1,3-benzenedicarboxylic acid), 5 mg/kg (2,2,4,4-tetramethyl-1,3-cyclobutanediol), 5 mg/kg (1,3-propanediol, 2-methyl-), and 6 mg/kg (trimethylolpropane). Coatings and coating layers using this substance as raw materials may not be used to produce food-contact materials and articles specific for infants and young children. These restrictions must be labeled in accordance with the provisions of GB 4806.1.